ARS NB9M

The Radio Shack Articles

    Posted Category
Remembering the Electra Company

For nearly five years, spanning 1978 - 1983,  I worked as an Electronics Technician in the original Bearcat manufacturing and service facility in Cumberland, Indiana.  Electra was one of the best places I've ever worked, and were among the many innovative consumer electronics companies which sprang up in and around Indianapolis.  Al Lovell, a former employee of Regency (also in ...  READ MORE

UncleBrad
02/22/2018
The Radio Shack
NB9M Studio C Installed

(Shown: 1/7/2018 checkin with the DX-60 Net on 3880, using the DX-60/HG-10B/HO-10 and the RME-6900)Using furniture-grade 5/8" plywood, simple tools and cold garage during Christmas vacation, I constructed Studio C, which occupies the south wall of the shack.  Exploiting a sturdy, existing cabinet with drawers that I've had since I was a kid, I devised a scheme to reliably handle the ...  READ MORE

UncleBrad
01/07/2018
The Radio Shack
Super Hoosier DynaLoop

The Super Hoosier DynaLoop consists of four 35ft (average) utility poles buried an average of 5ft, 125ft LMR-400 from R&L Electronics, a 5KW-rated 4-1 balun, rope and marine-grade hardware (mostly from EBay) and a 20ft length of 300ohm ladder line..  The closest pole is nearly 100ft away from the shack.  The poles are 140ft apart.  The antenna is far away from any powe...  READ MORE

UncleBrad
11/25/2017
The Radio Shack
NB9M Shack Construction, 2008

The hamshack is the result of a lot of thought. Featuring four 120V circuits on 200A service, as well as a 240V circuit for the amps, the idea was to have at hand dedicated equipment per band.  About 12 'X 18', carefull planning allows for sufficient room to both work and play.The shack is air conditioned and heated, with numerous switched antenna options for HF/VHF and UHF. &nbs...  READ MORE

UncleBrad
08/04/2017
The Radio Shack
Gonset GSB-100 and 101 Linear Amplifier

I picked these up at the 2107 Sturgis, MI AM Swapmeet, amidst a pack curious OMs.  What a find!  Jerry replaced the original transformer in the linear power supply with a new AL-811H transformer.  The cosmetic condition of these relatively hard-to-find Gonsets is astonishing.  There is one front panel scuff on the GSB-101, and a few inperfections in the cases (original pai...  READ MORE

UncleBrad
07/30/2017
The Radio Shack
You are on page 1 of 1
[ Previous Page / Next Page ]